Ten Inch Drone GPS Tail
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.75 – €0.92 net (excluding VAT)
For file: GpsTail241010c_0.6n_0.3mm_PLA_MK3S_46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.84 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 45.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tail I added to my 10" drone purchased from AliExpress. The tail holds a GPS unit with compass.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This is a tail to hold a GPS unit and compass away from interfering electronics on my ten inch drone. I printed the part using PETG. PETG is flexible but not as flexible as TPU. I'm afraid printing it with TPU would cause it to droop too much.
This model was designed in Prusa Slicer. There is no other CAD model for this design. I've included the .3mf file to allow anyone to modify the part using Prusa Slicer.
The frame was called "Mark 4" on AliExpress.