Magnetic Hotend Holder P2/A1/H2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Floating Hotend Holder that works with magnets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was searching for a good box for my P2 hotends, but wasn't satisfied with what I found. So I started thinking about how I could design a simple way to store them. Quickly I realised that the magnets that hold the nozzle against the toolhead could also be used for my purpose. I imagined a stand where the hotends are "floating" in the air. And thats it what came out...
I use circular 6x3 magnets for the holder which you can buy them from for example Amazon or the 6x2 ones from BambuLab.
You need to put in the magnets with the correct side!! They have to be below the magnet of the hotend:
If the magnets sit too loose use glue!
If you like the floating hotend holder, please like and follow to show your support for my work.