Adhesive band (Tesafilm) replacement roll
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because those rolls tend to break very easily here is a replacement with the exact same measurements.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The roll comes in two files, because I didn't want to print with supports.
Those were my print settings for the drum (but anything remotely sane should work as well):
PLA
Quality
0.4mm nozzle
0.2mm layer height
wall printing order: inner/outer/inner
only one wall on top surfaces UNchecked
Strength
3 wall loops
5 top shell layers
Top surface pattern: Concentric
5 bottom layers
Bottom surface pattern: Concentric
Infill density: 20%
Infill pattern: Gyroid
Fuzzy skin
Those were the print settings for the pin:
PLA
Quality
0.4mm nozzle
0.2mm layer height
Strength
2 top shell layers
Top surface pattern: Concentric
2 bottom layers
Bottom surface pattern: Concentric
Infill density: 50%
Infill pattern: Rectilinear
Brim
Type: outer brim only
width: 2mm
gap: 0.12mm
In the end I hammered both together.