1 / 1
Connectors and Fittings for AUS PVC Pressure Pipe Fittings (for Non-Pressure Use — image 1

Connectors and Fittings for AUS PVC Pressure Pipe Fittings (for Non-Pressure Use

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fittings to suit Australian PN18-labeled pressure pipe in 32mm, 25mm, and 20mm sizes, as sold at Hardware stores

Rating
0 / 5
Likes
48
Downloads
207
Makes
0
Views
841
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

CUSTOM 3D PRINTABLE PVC FITTINGS – AUSTRALIAN PN18 SIZING

These fittings are designed to suit Australian PN18-labeled pressure pipe in 32mm, 25mm, and 20mm sizes, as sold at Bunnings.

IMPORTANT: THESE ARE NOT FOR PRESSURE SYSTEMS

They follow PN18 sizing for compatibility, but do not meet any pressure certification standards.

Use** only** in non-pressure applications like:

- Green screen rigs

- PVC framing

- DIY stands

- Garden structures

Pipe sizing in Australia (Yes, it's weird)

Pipe sizes are based on internal diameter (ID), but fittings must match the outside diameter (OD) of the pipe.

- 32mm pipe = 34.0 mm OD

- 25mm pipe = 27.0 mm OD

- 20mm pipe = 22.0 mm OD

INSERTION DEPTH

These parts are designed to fit those outer diameters with a 25 mm insertion depth for each connection.

Exception: The AUS 20mm PVC PN180 Straight Coupler has no internal stoppers, allowing full pipe pass-through.

PRINT SETTINGS USED

- Material: eSun PLA Plus

- Nozzle Temp: 215 C

- Bed Temp: 60 C

- Layer Height: 0.3 mm (first layer 0.2 mm)

- Infill: 25 percent

Also included is a 6 mm drill guide for drilling bolt holes instead of using glue.

Pre-holed versions may be uploaded later if there is interest.

NOT FOR USE WITH PRESSURISED LIQUID OR GAS. STRUCTURAL USE ONLY.

Tags