1 / 1
MadMax Dragonburner Carriage w/ Carto MGN12H
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified version of the MadMax carriage to work with a cartographer on a dragonburner.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
I printed this out with 5 walls, 5 top/bottom layers and 40% infill. ABS/ASA at a minimum. I personally print my carriages in PET-CF and anneal for high heat tolerance since my bed can get to 130c and that causes abs/asa to get droopy.
When setting this up I highly recommend you insert the bottom washers before you add the m3 inserts. You may have to use a razor to ream out the area for the washers a bit.