1 / 1
MadMax Dragonburner Carriage w/ Carto MGN12H
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version of the MadMax carriage to work with a cartographer on a dragonburner.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I printed this out with 5 walls, 5 top/bottom layers and 40% infill. ABS/ASA at a minimum. I personally print my carriages in PET-CF and anneal for high heat tolerance since my bed can get to 130c and that causes abs/asa to get droopy.
When setting this up I highly recommend you insert the bottom washers before you add the m3 inserts. You may have to use a razor to ream out the area for the washers a bit.