1 / 2
Clickable Touch ID Box (TKL board, wired, USB-C)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Takes the model for the box by Calvin and changes the connector hole from Lightning to USB-C
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the rest of the parts from Calvin's original model, and follow their excellent assembly instructions.
I printed the box at 0.10mm (DETAIL) layer height, but it should print fine at 0.20mm (QUALITY).
I painted supports on the USB-C connector hole, and used snug supports. YMMV
I printed the box with a 90° fill angle
When assembling I used M1.2x6mm screws for the USB-C connector and it was much less fiddly
Credits:
@Calvin_5743 for their original model that I only had to tweak a little ❤