P
PrintablesVC Design
Cable Clips Collection - Clickable - ( Parametric )
Tested in PETG, recommended to print in PETG
- Downloads
- 9,325
- Likes
- 2,941
- Rating
- 4.51
Search results: clickable
Counting matching models…
P
PrintablesCalvin
Clickable Touch ID Box (TKL board, wired)
This model is also editable on Tinkercad This model is only for the TKL keyboard (the one without a number pad), if you have one with the number pad, the circuit board will not fit into this box. !!! C plate must be printed with 0.1mm…
- Downloads
- 1,619
- Likes
- 160
- Rating
- 4.77
P
Printablesnjozsef
quest 3 lens adapter clickable and easy removeable versions.
cheap lens: https://www.zennioptical.com/p/stainless-steel-round-eyeglass-frames-/5500?skuId=550021 Mark the top of the lens before removing it from the frame (CYL). If necessary, secure with instant adhesive against rotation. The glasses…
- Downloads
- 385
- Likes
- 29
- Rating
- 0
P
PrintablesRayCN
Clickable Touch ID Box (TKL board, wireless version)
You can modify it on Tinkercad. https://www.tinkercad.com/things/liW1dUVhePl-touch-id-boxwith-battery Please refer to the installation method as follows: https://www.printables.com/model/355924-clickable-touch-id-box-tkl-board-wired It is…
- Downloads
- 338
- Likes
- 20
- Rating
- 5
P
PrintablesPBak
stackable clickable button coin display rack
I metal detect, and I was looking for some neat way to display some best, couple hundred years old buttons or coins. Those are little racks, that stacks and clicks together, no need to glue or do anything. They print without support, very…
- Downloads
- 187
- Likes
- 29
- Rating
- 0
P
Printablessh
📷 DSLR camera, attachable lens, clickable shutter button, swivel wheel.
Info: DSLR camera model (based on Canon EOS 5D Mark II) features: attachable lens via thread clickable shutter button , which makes sound (based on great fidget from @kriswillcode ) swivel mode dial wheel (with some tension) see through…
- Downloads
- 184
- Likes
- 29
- Rating
- 0
P
PrintablesSimonO
19 inch Server rack clickable cable hook
After a lot of frustration with off the shelf cable organisers and other methods, mostly fixed with screws in cage nuts, I decided to make something that can just click in place. Then I realised that I might want to take it off again, so…
- Downloads
- 71
- Likes
- 22
- Rating
- 0
P
PrintablesUleCEnTION
Clickable Touch ID Box (TKL board, wired, USB-C)
Print the rest of the parts from Calvin's original model , and follow their excellent assembly instructions. I printed the box at 0.10mm (DETAIL) layer height, but it should print fine at 0.20mm (QUALITY). I painted supports on the USB-C…
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
PrintablesForgeFiles
Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete - 3D Printable STL File
A unique 3D printable creation — this Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete Size Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
- Downloads
- 40
- Likes
- 1
- Rating
- 0
P
PrintablesSteffen Moeller
Clickable wall Toolholder (Scalerable) wallmount
Printing settings: Material - PETG/ABS Nozzle - 0.4 mm Layer height - 0.2 mm Top, bottom wall, side walls - 3 mm Infill - 15% Print speed - 100 mm/s Print Settings Rafts: Yes Supports: No
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
PrintablesSandcrab
Clickable number pad toy
A number pad toy with spring back numbers. A good toy for little kids to learn their numbers. It is made based on springs that are 17mm long, with a 9.5mm outer diameter and a 8.5mm inner diameter. I used the 3/8 x ¾ springs from this…
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
Printablesctheroux
Parametric Clickable Stamps Holder
Parametric Clickable Stamp Holder. It fit out of the box the stamps distributed by Michaels'. The item numbers of these stamps are 10656553 and 10656558. Holder for 3 to 9 stamps are included as the base set. You can customize the holder…
- Downloads
- 27
- Likes
- 14
- Rating
- 0
P
Printablesvmax77
Orbitkey Mat ClickableTouchID
Made an attachment for the OrbitKey mat system for the Clickable TouchID case ( https://www.printables.com/model/355924-c ). Needs 5x 6x2 magnets to make it stick to Orbitkey desk mat rails I printed in PETG, but no reason any other…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesKamisama
Fidget Toy with Clickable Button and Spinning Finger Disc
This interactive 3D-printed fidget toy features a spinning finger disc and a spring-loaded button , perfect for stress relief, improving focus, or just keeping your hands occupied. The model consists of 4 parts that are assembled using…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
Printablesctheroux
Parametric Clickable Stamp Case
This is a parametric clickable stamps case. It fit out of the box the stamps distributed by Michaels'. The item numbers of these stamps are 10656553 and 10656558. Support material is not required. Out of the box, this case fits 6 sets.…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesFonn Prints
Clickable - UI Slider Fidget – Fast Print, No Supports, Simple 2‑Piece Snap Slider
This is a compact, satisfying fidget toy featuring three smooth‑moving UI‑style sliders. It prints fast, requires no supports, and snaps together in seconds. Each slider glides along its own rail, creating a simple but addictive desk toy…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesRogue Cyclist
4x6 Clickable photo frame
Simple 4x6 photo frame that can be joined together either vertical or horizontal. FreeCad model files included so you can easily adjusted to your own sizing. The click tabs depending on your printer tolerance may need a dab of hot glue to…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesVik
Clickable Phoenix Love Head
Takes a standard keyboard switch and allows fun, fidgety action. Let the mythical phoenix live again. The eyes can be friction fit or glued.
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
19 inch Server rack clickable cable hook
After a lot of frustration with off the shelf cable organisers and other methods, mostly fixed with screws in cage nuts, I decided to make something that can just click in place. Then I realised that I might want to take it off again, so…
P
Printables
Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete - 3D Printable STL File
A unique 3D printable creation — this Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete Size Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
P
Printables
Clickable wall Toolholder (Scalerable) wallmount
Printing settings: Material - PETG/ABS Nozzle - 0.4 mm Layer height - 0.2 mm Top, bottom wall, side walls - 3 mm Infill - 15% Print speed - 100 mm/s Print Settings Rafts: Yes Supports: No