Base plate for an upright beam 40x80 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The pad was designed to improve friction on a clamped wooden beam and to safeguard the floor and ceiling from damage.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The part is printed using flexible filament. To achieve maximum friction, I selected ColorFabb Varioshore and configured the print settings for the lowest possible Shore hardness.
Settings:
Parameter | Value |
|---|---|
Extrusion Multiplier | 0.65 |
Material Density | 1.22 g/cm³ |
Idle Temperature | 70 °C |
Nozzle Temperature | First Layer: 250 °C |
| Other Layers: 250 °C |
Bed Temperature | First Layer: 80 °C |
| Other Layers: 80 °C |
Print instruction:
material: flexible filament
supports: no
layer height: 0,2mm ... 0,3mm
nozzle diameter: 0,4mm or 0,6mm
brim: not required
enclosure: not required