Large Beyblade Stadium
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
600mm diameter beyblade stadium. Requires 220mm by 220mm printable area on your printer.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 66
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
A friend's kids got BeyBlade tops for Christmas, but not a stadium. I saw some here already but I wanted to do something bigger, so I did.
This is 300mm across, then divided into 9 segments, with the centre 200mm to a side. There are also 10mm tabs (2 per joined surface) so your printer must be able to address 220mm to a side to print these. I did some pieces on my FlashForge A5M and some on the Elegoo Centauri Carbon. They're large so take some time to print. May work well printed at 95% size for those with 200mm beds, but I didn't try it.
Printed in PLA at 0.2mm layer height, 3 solid layers bottom, 6 solid layers top, 15% cubic infill worked well.
I left 0.25mm tolerance around the tabs and holes to facilitate assembly, which might be a touch loose with my printer(s) it assembles well though and doesn't seem to rattle. I may recommend that it be glued together, but haven't done that yet. If gluing together, I would probably put posterboard or Dollar Tree foamboard underneath it to make it less noisy.