Inosuke - LED Lightbox - NO AMS NEEDED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inosuke LED Lightbox from Kimetsu No Yaiba
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
Inosuke LED Lightbox - Printing Instructions Included
All the necessary printing instructions are included in the file.
If you have any questions, feel free to DM me!
Assembly As shown in the photos above but also numbered on the STL Files
You will need a 1mm thick glass layer or any transparent material of your choice. 195mm x 80mm x 1mm
Also, make sure to have a strip light of your choice for the lighting.
For Support,Commercial Use & More: https://www.patreon.com/c/ACSPARK3D
Enjoy showcasing your Inosuke lightbox!
Note to always put the transparent layer last
Recommended to print the first black frame at 30m/m speed
Manufacturing settings
LightBox Frame Settings:
Layer Height: 0.2
Walls: 2
Bottom: 2 (Or 3 to hide infill lines)
Top: 2
15% Infill
LightBox Back Plate Settings:
Layer Height: 0.2
Walls: 2
Bottom: 3
Top: 3
10% Infill
LightBox Transparent Layer:
Layer Height: 0.2
Walls: 2
Bottom: 2
Top: 2
1% Infill
Design Layer Settings:
Layer Height: 0.2
2 Walls
2 Top/Bottom
3% Infill
No supports