openGrid - Self-Expanding Snap - Flush screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flush Screws for mitufy's self-expanding snap for openGrid.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This is a remix of the screw part of mitufy's Self-Expanding Snap, which is in turn based on David's official directional snap for multiconnect and openGrid. My remix (the flush screws) eliminates multiconnect functionality, is standard openGrid size (not lite), and only works with the previously mentioned Self-Expanding Snap. I use it to gain some extra space when routing cables with Underware for openGrid.
There are 4 variants:
flush_screw: Basically just like the original, but it's cut down to be flush. There's a coin slot to screw it in.
flush_screw_zip_tie: The same, but with an internal tunnel to pass zip ties (5mm max).
flush_screw_ring: An open ring (PETG works best) to hold heavy-ish cables. If you want, you can close the gap with a bit of tape. There's no coin slot, just grab and twist it by the ring itself.
flush_screw_remixable: Just the flush screw. Impossible to screw, use it only to remix.