1 / 2
IKEA KALERUM (305.536.50) Drill Guide – PAX Door Handle Template (256 mm) — image 1
1 / 2

IKEA KALERUM (305.536.50) Drill Guide – PAX Door Handle Template (256 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This 3D-printable drill guide is made for installing the IKEA KALERUM handle (305.536.50) on IKEA PAX doors with clean,

Rating
5 / 5
Likes
3
Downloads
55
Makes
0
Views
401
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

IKEA KALERUM (305.536.50) Drill Guide – PAX Door Handle Template (256 mm)

This 3D-printable drill guide is made for installing the IKEA KALERUM handle (305.536.50) on IKEA PAX doors with clean, repeatable results. It sets the two handle holes at 256 mm center-to-center and positions the handle at the correct height—no measuring each door, no crooked handles.

Positioning (PAX door reference)

  • Measure from the top edge of the PAX door straight down.

  • Place the guide so the upper edge of the drill guide sits 1012 mm below the top of the door.

  • Align the guide to the door edge as designed (left/right), clamp if possible, then drill.

What it does

  • Locks in hole spacing (256 mm) for the KALERUM handle

  • Gives consistent placement across multiple doors

  • Helps keep holes straight and handles perfectly level

Print recommendations

  • Material: PETG

  • 0.2 mm layers

  • 3–4 walls/perimeters

  • 5-10% infill

  • Print flat for best dimensional accuracy

Use tips

  • Start with a small pilot hole if you want extra precision, then drill to final size.

  • Always test once on scrap or an inside face to confirm your printer tolerance and drill bit fit.