Ultra PRO One Touch Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick to print, simple to assemble One-Touch stand with a handful of configurations.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 94
- Makes
- 2
- Views
- 373
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't satisfied with the options currently available, although they work, they were too distracting, or take too long to print for my liking.
I have designed this stand with customizability in mind.
Glue may be needed for assembly.
Happy printing :)
Inspired by Vigglez's Card Holder Holder for Ultra Pro One-Touch
There are four things that can be changed, totaling to 16 variations:
Length of bar
Angle of the One-Touch
A tab that fits into the notches at the bottom of a One-Touch
Height of the lip of the stand
Short and long bars, for vertical and horizontal display
Different angles to display the One-Touch
I prefer to use the 22.5 degree model when I display my One-Touch on my desk, making it easier to look at the card head on. I find the 11 degree model better suited for shelf displays.
Tab for keeping the One-Touch in place
The tab aligns with the notch on the bottom of the one touch.
! IMPORTANT !
when printing for horizontal displays, make sure to print un-tabbed, the One-Touch will not sit well in the stand otherwise.
Height of the lip of the stand
The lip of the stand stops right at the edge of the card, for either horizontal and vertical orientations, although I do prefer the short lip on both for the least obtrusion.
Recommended seam positions
