IKEA MALM Bed MagSafe & Apple Watch Charging Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip-on charging stand for IKEA MALM beds with MagSafe phone charging and Apple Watch support.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
This model is a clip-on charging stand designed specifically for the IKEA MALM bed frame. It attaches by simply sliding onto the headboard—no tools, screws, or additional hardware required.
The stand integrates a wireless charging puck, allowing a phone to attach magnetically via MagSafe and charge while held securely in place. It has been tested with an iPhone 13 and an iPhone 16 Pro, and the clearances fit both devices without issues.
In addition to phone charging, the model also supports Apple Watch charging. The original Apple Watch charging adapter can be snapped into the dedicated mount and held securely.
Printing notes:
- Supports are required for this model, I had good results with tree supports
- Support removal is a bit tedious but manageable
- Printed successfully in PLA without any issues
- Recommended print orientation:
Print the model standing on its side
The Apple Watch side should face down onto the build plate
Notes:
I used this Mag-safe adapter from Amazon: https://www.amazon.de/dp/B0D3DX89B7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
It needs a little fixing with double sided tape
for the Apple Watch I used the original charging Puck