Counting matching models…
Hello all, here you can find a set of different inserts for an IKEA ALEX & MALM office cabinet . I love to organize and have been inspired by Alexandre Chappel in the creation ( Youtube ). He created the inserts for his homemade drawers,…
I designed Malmö's landmark in Fusion 360 and it was a lot of fun. Especially the 90° turn of the building. The windows not so much :) I scaled the print to 180% because of the thin beams at the pointy side of the building and cut in in…
I've created the baseplate for the IKEA Malm desk drawer with the fusion 360 plugin GridfinityGenerator so that you don't have to. Malm desk drawer size: 317mm x 391mm It's separated into four parts to be printable with most printers. No…
I made a remix of the post: https://www.printables.com/model/725026-malm-bedside-table-old-dimensions I had to adjust to the new dimensions and added a removable bin.
Compact, print in place storage box for the ThermalMaster P3. Model uses 3x5mm magnets by default. Printed in ABS / 0.08mm Layer height, magnets fits tight (no need for glue) Box is print in place. Way more compact than the default…
This bracket was designed to support the horizontal divider between the drawers if they become damaged. Often the dividers are damaged where they are secured to the sides and the supplied fixings can not secure them. The bracket is…
IKEA's Malm drawer has very sharp corners. This model allows you to round those up. I've printed it from PLA. My goal is to minimize the risk of deep cuts if this corner collides with a child's head. With PLA, it should cause bruising.…
MALM bed holder for beds not pushed up against the wall. This model is for the 4 cm between backside of the bed and the wall. Holder inner area is 186 x 106 mm. Enough for big 6"9 phones remotes or whatever. Print settings I used: PLA and…
I made a remix of the post: https://www.printables.com/model/725026-malm-bedside-table-old-dimensions I had to adjust to the new dimensions and added a removable bin.
Compact, print in place storage box for the ThermalMaster P3. Model uses 3x5mm magnets by default. Printed in ABS / 0.08mm Layer height, magnets fits tight (no need for glue) Box is print in place. Way more compact than the default…
IKEA's Malm drawer has very sharp corners. This model allows you to round those up. I've printed it from PLA. My goal is to minimize the risk of deep cuts if this corner collides with a child's head. With PLA, it should cause bruising.…
Tapo Cam Series 2xx Mount for the Ikea MALM bed head rest.
A simple hook/hanger for the Ikea MALM dresser, fits over the angled edge of the dresser drawer. It uses the drawer's angled geometry to hold large weights without snapping or buckling. It also has a thin rear support that holds it on the…
Title: IKEA MALM CPAP Hose Management Clip - Perfect Bedside Holder Tired of your CPAP hose pulling on your mask or getting tangled in your pillows? This custom-engineered clip is the perfect solution for users of the IKEA MALM bed…
This bracket was designed to support the horizontal divider between the drawers if they become damaged. Often the dividers are damaged where they are secured to the sides and the supplied fixings can not secure them. The bracket is…
This is the first version of a bedside shelf for IKEA MALM Beds. There a some minor design flaws, but print turned out quite well (except a problem with first layer) and fits perfectly. it is a quite stable design. if someone wants to…
Ich habe eine alte Ikea-Malm-Kommode als Wäsche-Sortiersystem hergerichtet. Damit jeder im Haushalt weiß, wo welche Dreckwäsche hinkommt, habe ich drei Wäscheschilder designt, die sich einfach auf die schrägen Vorderseiten der Schubladen…
These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…
The IKEA MALM is a bed with integrated drawers, whose front sadly has a tendency to break off, especially with heavily loaded drawers. The first piece of this kit is an L-bracket designed to be mounted inside the drawer on both sides,…
I needed to space my desk from the wall without using any tape or screws because of LEDs, so I made this! Gives 5 centimeters of space between the wall and the desk, should fit properly. Recommended to print with 20% infill in PLA, but…
I hated the look of the lightspeed receiver and the cable on my desk, so I decided to make something useful that gave me the option to charge the mouse with the cable when I needed it. The receiver fits on the print and the cable fits…
The base of everything, all of my IKEA Malm Desk accessories will start from here. I decided I didn't need to edit my models everytime to make stuff fit and make it harder to recycle parts, now I'm working on a clip system!
Your blank canvas for every MMalm Module you need to develop vertically! Can be printed vertically, you just need to cut out the base when you're done printing and add brims if you think it's going to detach from the plate. Print it only…
This piece works as a module for the MMalm Modular Attachment System, you print 2 of them and you distance the desk 5cm from the wall, useful when you need softer LEDs but they're low in density, also adds a comfort factor, you're more…
Use it to keep you Lightspeed receiver out of the way!
Import STL, split, put biggest side towards bed, print! 3 sets needed - backside, frontside, cover - quick print. Was not that user friendly to mount, but worked well. I wanted a cheap glass plate for the kitchen, and this was a simple…
An IKEA Koppla power strip 3-way socket holder for IKEA Malm Bed. It allows you to place your IKEA KOPPLA extension cord on the IKEA MALM bed without glue or screws. IKEA Malm Bed (Article number: 904.047.99 ) IKEA Koppla 3-way socket…
The IKEA Navlinge plastic hinge breaks easily when connected to Malm bed. I decided to replace the broken bracket with my own design. This simple design is cleaner too. I recommend printing it in the orientation shown in the picture for…
Really simple clips, they slide over the top and have a rectangular opening on the other side for you cables to hang on top of. I used a velcro tie to secure them to the clips, as in the images. These finally fixed my issue of having…
A mount to add a shelf to your ikea Malm bedframe securely and without a need to damage the bed
I have been looking into having a gamepad and headphone holder for my Ikea Malm table. One day I saw 3DSpenny's headphone mount (here) and decided to model one for my gampad
Headphone holder for drawer of an IKEA MALM nightstand. 30mm wide head bands possible. Print standing on its side. No supports necessary.
Holds One iPad Pro in vertical orientation with room left for another tablet or magazine. Hangs off headboard.
A practical remote holder specifically designed for the headboard of the Ikea Malm bed. The minimalist design keeps your remotes easily accessible while saving space. It attaches securely to the bed with a snug fit and requires supports…
The slim variation of IKEA MALM has a top-side compartment that can be folded open with a mirror inside, which is perfect for storing jewelry. There are no separators, so this can quickly turn into a mess. This model separates the usable…
Printed the original model at 50% scale for my daughter's Christmas gnome and quickly realized that there's something wrong with the Malm body model, some drawers wouldn't move at all, get stuck and also they weren't aligned at the same…
ich brauchte eine einfache Beschriftung für meine Malm Kommoden von Ikea. Breit 80mm, Hoch 44,6 und Tief 27,5. Schriftfeld Abmessung exakt 80mm Breit und 20 mm Hoch ich hab es in der höhe auf 19 mm geschnitten über likes makes und…
Complete set for a Gridfinity Base of an Ikea Malm Drawer (40x55 cm) . This print-file contains all the needed Gridfinity-Baseplates, Spacers and Connectors designed by HuMa . Because of tolerances, smaller and bigger spacers are included…
This is a simple but effective drawer organizer for small malm drawers (40cm), whites organizers are designed to be exatcly half of the drawer width and other are half the size of the white one. So with this you can print or organize it…
MALM bed holder for beds not pushed up against the wall. This model is for the 4 cm between backside of the bed and the wall. Holder inner area is 186 x 106 mm. Enough for big 6"9 phones remotes or whatever. Print settings I used: PLA and…
Designed for almost all types of glasses and mugs. No installation is needed. Works just by sliding it onto the bed frame. Category: Household
To fit Ikea Elloven to Ikea Malm table. Fits for 55 mm tables
I needed a shelf to go on my headboard to hold a Projector when in use and other things when not using the projector. I made it far too sturdy, this thing isn't going anywhere. If I need to reprint for some reason; I'll edit it, trim it…
Habe eine Halterung entworfen um eine JBL Box am oberen Kopfteil von einem Ikea Malm Bett zu befestigen. Wird einfach am Brett eingehangen. Kann an allen erdenklichen Flächen mit einer Dicke von max. 41mm eingehangen werden wie z.b.…
Ikea's Malm bed has a steel bar in the middle that is lower than the wooden side edge and blocks their own Skubb under bed storage. But I will not be stopped from pushing my Skubbs all the way through to the other side, so I designed…
Rozměrově podobný jako originál. Výška vrstvy 0,2 PLA se při této šířce stěn zdá dostatečný.
A simple child lock for the IKEA MALM Chest You will need just a piece of double sided tape To install just align the piece with the front of the drawer and the middle brace
This is designed to hold 2 remotes and glasses. I was able to print this upside down without supports using PLA. I have attached the Fusion360 Cad file for anyone who needs to customize it for their own needs.
I wanted a place for my mug to charge while drinking tea as I go to bed so I modeled this to slip over my headboard because the power cable kept slowly dragging it off my bedside table Charging coaster should fit snugly I used PETG with…
Ikea Malm Gürtelhalter mit variabler Abtrennung 4 Stück passen in die kleine Ikea Malm Schubladen. 8 Stück in die großen Schubladen. https://www.ikea.com/de/de/p/malm-kommode-mit-6-schubladen-schwarzbraun-70403606/
This is a minimalist floating shelf or projector mount designed specifically to attach to the headboard of the IKEA MALM bed . It's ideal for holding a portable projector , smartphone, books, or other small items. The design clips…
Ikea Malm magnetic baby latch, embedded magnet inside the latch so that no holes needed on outside. Opens with larger magnet tool.
You can mount this cable holder between the Malm night stand and the glass plate.
Prints in TPU You can try different wall counts / infill if needed.
There are screw holes under the IKEA MALM desk, this is for adding hook for your audio headset.
A mount for the Pixelsnap charging pad to hang vertically from the Ikea Malm bed. It's a snug fit with a recess out the bottom to protect the cable. I printed the overhang with supports.
This is a drawer stopper for IKEA Vihals or Malm beds. It prevents the drawers from sliding under the bed. Es handelt sich um einen Stopper für die Schublane von dem IKEA Betten Vihals oder Malm. Damit die Schubladen nicht unter das Bett…
This model replaces the standard feet of the IKEA Malm bed (older model). The feet are placed under the headboard or footboard of the bed and provide stable support. This is especially useful if the floor is very uneven. The feet are easy…
This clamp base fits on to the IKEA MALM headboard and allows you to clamp your reading light. Printed with 4 walls, 15% cubic infill and no supports required.
## Introduction If you have an IKEA Malm bed and you want to watch YouTube, Netflix, or movies in bed hands-free, this model is perfect for you. This mount lets you attach a boom-arm tablet holder directly to the Malm headboard. It is…
Designed to stop my wife (wth Dementia) taking everything out of her drawers. The catch auto engages and allows the drawer to be opened enough to release catch. The catch screws into drawer with short chipboard screws. Printed in PETG-CF…
Very much doubt anybody in the world would have a use for this, but just in case: here you go! It is designed to close a small gap on the Malm bed without drawers. In my case this annoying gap would cause my cats to go in there and stir…
3D printable topographic miniature of Stockholm, Södermalm North - 🇸🇪 Sweden Capture the beauty of Stockholm, Södermalm North 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
Simple model for making the Ikea Malm 3 drawer model a bit higher. To be exact 5.5 cm
Ikea MALMA bed hole plugs for those opting out of a headboard. Category: Parts
Since the IKEA Malm is so wide, you can't attach a clamp lamp directly to it. This adapter enables you to fix a clamp lamp on the IKEA Malm and it also has a holder for the light switch. The wall thickness has to be big so that the holder…
This headphone holder is designed to clip directly onto the headboard of an IKEA MALM bed frame—no tools, screws, or additional hardware required. The hook simply slides onto the headboard and stays securely in place through its shape and…
This model is a clip-on charging stand designed specifically for the IKEA MALM bed frame. It attaches by simply sliding onto the headboard—no tools, screws, or additional hardware required. The stand integrates a wireless charging puck,…
I wanted a holder for my Anker 3 in 1 wireless charger that would sit by my bed. I designed that so it has a dedicated spot. Theres slight play in the charger slot and the bed slot but nothing awful and it still works perfectly.
A gridfinity storage container that overhangs from the side of a Malm Drawer for jewelry and accessory storage. It contains a 3x4 gridfinity grid up to 6U tall for customizable storage. I am using it to store various accessories such as…
i needed a pocket to hold my apple controller and other things on my side of the bed where there is no room for a table. easy print with no supports . Print Settings Printer: custom cartesian Rafts: No Supports: No Resolution: 0.30…
Printed with 3 walls and 25% infill. Using Elegoo PLA. Seems sturdy enough for my projector. I've also added the scad file for those that needs to change the dimensions
You will need a piece of wood and cut it in size. Additionally you will need 4 screws to mount the shelf to the shelfbrackets. I used 3.0x16mm screws (for wood, as the holes are countersunk). You can mirroring/reflecting the shelfbracket…
Headphone hook for IKEA MALM chest, convenient solution to headphone storage. Specifically for 30mm thick headphones.
Tapo Cam Series 2xx Mount for the Ikea MALM bed head rest.
🎧 Ikea Malm Desk Headphone Hanger A simple, functional headphone hanger designed specifically for the Ikea Malm desk. It slots neatly into the built‑in cable‑tidy area, giving your headphones a clean home without adding clutter to your…
A simple hook/hanger for the Ikea MALM dresser, fits over the angled edge of the dresser drawer. It uses the drawer's angled geometry to hold large weights without snapping or buckling. It also has a thin rear support that holds it on the…
Title: IKEA MALM CPAP Hose Management Clip - Perfect Bedside Holder Tired of your CPAP hose pulling on your mask or getting tangled in your pillows? This custom-engineered clip is the perfect solution for users of the IKEA MALM bed…
This is a set of shelves I made to clip onto my Ikea MALM bed. My plan is to eventually work this into a fully customizable interlocking system that clips to the headboard, and can replace the need for a nightstand. The design files are…
An additional storage space that fits the IKEA Malm series. The are 2 STLs, one for each side. Print instructions Category: Organization Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Notes:…
This headphone holder is specifically designed for the Logitech G432 and provides a perfect fit for a clean and practical setup. The mounting cylinder has a 30 mm diameter and is designed to fit directly into the cable management hole of…
Ever been thirsty at night and didn't know where to place your beloved Stanleys, SodaStream Bottle or other beverage container? I've got the solution for you. This cup holder slides onto a drawer of an IKEA MALM nightstand. With a few…
Replacement for the slippery plastic feet under IKEA MALM beds. Regular version should have the exact measurements of the “stock feet” while the thick version is… well… thicker which works well with TPU.
I did not receive all the plastic feet for a Ikea Malm Dresser. I printed at a higher infill to make sure it was durable, although probably unnecessary. Infill: 50% Ikea Part MPN: 153548158568
Remote holder for IKEA MALM Bed Updated base: Now fits the 4cm head piece New Remote holders (x y axis): 18x35mm and 44x12mm Print Settings Supports: Yes Category: Organization
Stops the drawers of the IKEA Malm dresser 1.5 cm before closing, so the finger of the kids are protected. The little missing part is to have clearence for my drawer child-locks. One on each side, they are held down by the little clip…
Need a holder for all your small accessories that you might need right before sleeping? You wake up with dry lips and don't want to search for your lip balm in a drawer or from the bedside table where you accidentally tip it over and it…
This model is in 3 parts and is designed to be fixed in the two existing holes visible on the left side of the desk. They must be assembled with 6mm diameter screws such as the one given by Ikea (more exactly: 6.28mm), see picture.…
This is a Remix of https://www.printables.com/de/model/196829-ikea-malm-holder-for-remote-controll Printed with PLA. Supports needed.
I made this bracket to securely mount two drawer units together. It uses 3.5x20mm wood screws. Be careful when screwing the screws, overtightening will crack the layer lines. I use standard Voron settings - 5 top and bottoms, 4…
Had this major problem to hold iPad when watching it in bed. Problem solved. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Category: Tablet
Replacement part for Ikea malm computer desk slide out table. Category: Replacement Parts
Design-wise, I only added a cut-out. However, for the print I added custom supports. Both helps to reduce plastic waste, I hope.
