IKEA Malm Tablet Arm Mount – Bed Headboard Holder

## Introduction

 If you have an IKEA Malm bed and you want to watch YouTube, Netflix, or movies in bed hands-free, this model is perfect for you. This mount lets you attach a boom-arm tablet holder directly to the Malm headboard. It is strong, stable, and does not damage the wood (except for the hole, that you can later fill). 

## Key Features - Designed specifically for IKEA Malm headboards 

- Strong and stable structure 

- Works with many boom arms (tablet holder, mic arm, etc.) 

- Clean look, no clamps  - Great for watching videos, reading, video calls, or using an iPad in bed 

## Screws Required 

This mount uses **three 3.5 mm wood screws**: 

- **2x side screws**: ~10 mm long - **1x rear screw**: ~15 mm long 

I personally tested this setup and it works very well — secure and solid for everyday use. 

## Print Orientation & Supports 

For best strength and print quality: 

- **Orientation**: rotate the model **−60°** compared to its normal resting position (Printing at this angle improves strength and avoids weak layers under load) 

- **Supports**: Yes, supports are required with this orientation - Result: better layer line strength and safe use with tablet weight 

## Print Settings 

- Layer height: 0.2 mm - Walls: 4 

- Infill: 30% - Brim recommended 

- Material: PLA or PETG (PETG preferred for high strength) 

## Assembly 

1. Place the mount on top of the Malm headboard  (mark where to make the holes for the screw)

2. Screw it into place using the 3 wood screws 

3. Insert the boom arm into the top hole 

4. Tighten the side knob on your arm (if present) .

5. Mount your tablet and adjust the arm 

## Notes 

- Double-check your boom arm capacity for heavy tablets 

- Works best with iPads and light tablets 

- Stable and comfortable for long movie sessions in bed Enjoy your hands-free setup!