xtool f1/f2 raspberry pi camera mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple camera mount to mount a Raspberry Pi cam 3 onto an xtool f1 or f2 laser engraver.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple mount to mount a camera inside the enclosure of an xtool f1/f2 laser engraver. There are two pieces - a base and the mount. The mount is for a raspberry pi cam3 and you'll need m2.5 screws/nuts to attach. I used an m3 screw/nut for the hinge.
Camera I used is the v3 camera "wide": https://amzn.to/4sinbXN
Extra long ribbon cable is here: https://amzn.to/3YRNzdm
...and of course the Pi: https://amzn.to/4axHxWy
For streaming the video I used mediamtx: https://github.com/bluenviron/mediamtx
Easy print to do. I used PETG and it has a few supports but easy to remove.
Have fun!
Dave