Counting matching models…
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
A simple key tray for the BMW F20/21: finally the thing is well stored. Just put it in the cupholder - done. Consists of two parts that are glued with CA.
Print approx. €2.60–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a display stand for the F22 Remix model found here . The display stand base can be printed at 1:1 scale, The stand tower needs supports so that the lip around foot is supported during printing. The F22 model needs to be printed as…
Print approx. €1.98–€2.41 excl. taxPreliminary estimate for PETGSource material: PET
This is the F22 raptor a stealth fighter of the 5th generation of jets when printing use supports for better quality and it can hold its self up all by its self as well
Print approx. €2.07–€2.52 excl. taxPreliminary estimate for one variant
ctf_2fort comes to your desk in this small printable model form! The model comes with its .stl file, .3mf project file and a pre-prepared lower print time low quality .gcode file for a 16cm long print for the Prusa i3-mk3s+. If not using…
Print approx. €8.09–€9.89 excl. taxPreliminary estimate for one variant
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant
plr_hightower comes to your desk in this small printable model form! The model comes with its .stl file, .3mf project file and a pre-prepared lower print time lower quality .gcode file for the Prusa i3-mk3s+. My main recommendation is to…
Print approx. €10.84–€13.24 excl. taxPreliminary estimate for one variant
Built to suit the wifi multiboard found on Aliexpress:…
Print approx. €3.10–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
Flashlight holster designed specifically for the Sofirn IF22A. Parametric .f3d file included so you can customize the clip to your needs. Easily remixable for other flashlights. Updated model no longer has a bottom, unlike in the photos.…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
Templates currently available: 15ft lines straight offset diagonal 15ft cones orthogonal diagonal 30ft lines straight over three down one over three over two down one over two down one over one diagonal 30ft cones orthogonal diagonal More…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
EDIT: I have added 2 more variants of the kit (looped and un-looped) with the main fuselage flipped round the right way. Should remedy any confusion, but keep in mind the very thin footprint at the rear! The F22 Raptor is a 5th generation…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the corsair is very realistic Print in place kit card , Assembly required
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
The default model is 1mm thick and arround 20cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
F22 Raptor with a wingspan of 70cm There is also a single part print to scale to the size you want
3D print file for QUADMULA Djinn F25
Settings: 0.10mm Fast Detail Ironing: On Infill: 30% Filament used: Prusa Galaxy Black PLA Generic white PLA Made using Autodesk Fusion 360
Print with PLA, need a rubber band
Team Fortress 2, Engineer PDAs 1:1 accurate Designed as a prop replica that you can simply print and put together (glue required) Destruction: full size : 14.8cm x 9.8cm x 3.5cm The antenna extends and the button can be pushed via a…
a f22 model ideally printed vertically (nose up) floating about an 1/8 of a inch with organic supports everywhere
Description Immerse yourself in the world of aviation with our 3D-printed F-22 Raptor Kit Card. This unique and versatile product combines the excitement of building a model aircraft with the convenience of a greeting card, making it a…
I designed this to protect the NEF24 module that I bout for my flipper zero. It has easy access to the pins and fits the board perfectl.
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
BMW Phone Stand for the cup holder. I added the pit for the key or something diffrent behind the phone. Simple to print, I uses ASA so it doesn't bend when the car is parking in the sun. Recommend somthing similar like ASA, ABS or PETG.…
please follow us on instagram if you like this work: https://www.instagram.com/3dprintkings I recommend to do a color change by script and use a prime pillar
I added the "F22" to the left wing of the original model
Trichter zum befüllen von Scheibenwischwasser für z.b. BMW F20 Der Trichter wurde so geändert, das man einen O-Ring einsetzen kann um einen stabilen sitz zu bekommen und gleichzeitig eine abdichtung zu erzeugen.
Mein Dosenhalter (0,33l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,25l-Variante…
Scale 1:42, but is designed to go with Captain Ahab's WW1 micro armor planes https://www.thingiverse.com/thing:4680918 Designed in Fusion 360 Same plane used in Battlefield 1
Info This case is made especially for the Multiboard v2 with ESP32 and AS01 NRF24 Chip on it! Its made press fit, glue is maybe required if board tolerances are too big. What you need to print: 1x Botton 1x Top 1x Slider 2x Button No need…
Mein Dosenhalter (0,25l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,33l-Variante…
has space for a small oval 8x10x12mm motor, and 2 3mm LEDs in the arms. i also filed them down to make the dome flat for easier glueing. i put a power supple in the form of a tiny li-po cell in the spinny part itself. ie the lazy solution…
Small Stand For Nakozen's F22 kit card. https://www.printables.com/model/143166-f22-raptor-kit-card May work with some of Nakozen's other models aswell. Meant to have the same look as the kit with every thing sliding together. Depending…
It's a stand for the cheap Emulation Handheld Data Frog SF2000
I don't have enough filament at the moment, so I haven't printed it yet. It is a very simple model, made in one piece. There are very few sources on the internet that adequately describe this mine, so this model is for display only. It is…
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
Eine Abdeckung für die untere Öffnung der Wechselsucher der Nikon F und F2 Kameras. Die Paßgenauigkeit der Abdeckung wurde an 14 verschiedenen Suchern ausprobiert. Eyelevelfinder, Lichtschachtsucher, Lupensucher, Sportsucher, DP-1 und…
A simple holder for OOONO No.1 on the room mirror bracket cover of BMW F21/F22. It can be printed the side face down, and I recommend to use some 1mm thickness form tape in between the holder and the OOONO No.1 to stabilize it. This way,…
Hey there! I made this < 43cm (16.93 inches) wall art that can be printed in one, two or even three pieces, so it's printable in its original size on smaller 3d printers aswell. However if you'd like to scale it up or down, go ahead! The…
It's a mount for GPS on M10 chip in mini formfactor. FlyfishRC GPS M10 mini fits well
This is an adapter from a osVAC Neo 25mm female connector to a 20x4mm hose. The adapter allows the hose to rotate freely. ATTENTION: This is for the osVAC 25mm system and not the more common 32mm system. I created this adapter for the…
What is it? It's an as-small-as-possible case around the “Kasiin NRF24+ESP32 Multi board v2.6” for the Flipper Zero. Use the pin guard to keep it in your pocket without the pins suffering. Comes with the Fusion 360 file, so you can make…
Following RJ019s method to build this module. Apparently i dont know left from right, so i accitentally built the module with the antenna on the “wrong” side, so to avoid me plugging it in wrong and blowing stuff up, i had to add the side…
Glow Plug Sleeve for changing glow plugs on a 2008 Ford Super Duty 6.4L diesel engine. Works great. I would not change a glow plug without one. It is a very simple cylinder with a flange, easily sketched from scratch. AA battery included…
3D case for Flipper Zero WiFi Multiboard NRF24+ESP32
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
Designed for AMS printing. Project file included for Bambu Studio.
The Wolverine F2D Film Digitizer handles up to 5-inch reels of 8mm or Super8 film. This allows you to use 7-inch reels. I saw other setups here and found them to be complex and require bearings, wood, screws, clamps etc. This one uses…
Clutch Stop for Bmw M 10 x 40 16 key-width Pla Full
This is the bonesaw. It is the stock medic melee. The edges are kinda sharp. Personally, I like to print it upside down. If you are using PrusaSlicer or EasyPrint, you can do this. The infil is up to you, and the handle is kinda flimsy at…
A fuel pincher for F2D combat, to pinch fuel tube It uses the Ruthex M3 inserts Print Settings Printer: Prusa Mini Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Prusament PETG Notes: Fuel pincher for F2D combat Category:…
9v powerbank/adapter to 5v usb that i made. 9v battery's are regular available in almost any gas station or supermarket. Parts you need: Some (hot) glue to glue the pcb/cable and some superglue to glue the battery connector on the print.…
Nikon F & F2 Reparatur ausgerissener Gewindering für die Augenkorrektur Linse. An manchen Suchern für die Nikon F oder F2 ist das Gewinde aus dem Suchergehäuse ausgerissen. Der Reparatursatz besteht aus einem Dorn mit Gewinde zur Aufnahme…
9v powerbank/adapter to 5v usb that i made. 9v battery's are regular available in almost any gas station or supermarket. Parts you need: Some (hot) glue to glue the pcb/cable and some superglue to glue the battery connector on the print.…
ERRF2023 Logo Layer Swap - for those of us with standard printers. No need for MMU. Just pause at layers 2.30, 3.50, and 4.40. First layer is white, following blue, yellow and red. Hope to see ya'll at ERRF2023!
I expect this should print pretty well with any filament with default settings. no supports or brim required. I've printed this in generic PLA and PETG and it always has a nice friction fit.
A mount to adapt your HP f210 dashcam to position it in the rear window of a ute/pick-up truck or van. Requires modification to the mount that comes with your dashcam. I have printed the parts in PETG and they have survived a summer in…
TPU front cap for the Helios 44M 58mm f2. I made two versions: one dualcolor with text and a simple one without text and one color. It might also fit for other versions of this lens but i don't know. The Fusion file is included in case…
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
German: Das ist der kleine Sicherungsstift für die Finne an einem SUP Paddel Board. Ich habe keine Möglichkeit zu testen ob es passt, da ich es für meinen Bruder erstellt habe. Also Maße vergleichen und testen! Er hat ein SUP der Marke…
I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
A simple plate model designed to hold six aluminum business cards for engraving. The cards are intentionally offset from the plate’s horizontal center, allowing the use of autofocus during engraving. Initially, I encountered issues with…
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
In an act of criminal engineering, the designers at BMW decided to locate the cupholders on the F22 BMW slightly recessed under the dashboard. As a result, I must listen to my wife complain every time she gets a Big Gulp. Fortunately I…
This Gridfinity storage solution is designed specifically for your MF200 Air Duster and its attachments. The 5×3 box holds the Air Duster itself. The 5×2 box is made for the nozzles and attachments. Both boxes are available in two…
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
This model represents the Wolfbox MF200 Air Duster and is meant as a reference for creating your own holders, mounts, or accessories. It helps you save time by avoiding manual measurements simply align your design to the model. Two…
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
Holder for Fanttik F2 Master for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
Hardware: Motor: This uses a 24v XD775 DC motor with a 30mm shaft. This siren is intended to run right off of 12 volts DC. No buck converter required for the right pitch. You need a decently strong power supply. I use a 400 Watt.…
The original spot welder pens that come with my new AwithZ UF20B spot welder is a bit unwieldy due to its size, the one-handed pens that can be used with it (WP-240) is not very available hence this design. This help with having evenly…
Laowa 90mm f2.8 lens hood designed for those who have lost theirs. Features: Uses the lens bayonet to mount. Uses friction to stay in place instead of a neat spring :( Does not interfere with filter threads or lens cap. Anti reflection…
I absolutely loved the original comb by @Benders Brother. Made some tweaks to the original based on my usage such as added another slot so the bolt head and nut sit flush with the body added a loop so that it can added to a keyring or…
A friction fit base that fits onto the bottom of your case and will hold the small accessory case to keep everything together. No glue or hardware needed. Recommended to print 100% solid for durability. Recommended to print 102% scale…
Motivation I wanted to start designing a few accessories for my xTool F2 Ultra UV but needed a template to use as a basis those designs. Solution Measure, record, and design a template. Updates v1.1 Added detailed labels for the rotary…
A 1x5x6 Gridfinity tray designed for the Fanttik F2 Master rotary tool. The tray will not stack with the tool inside, but I created it for easy tool removal. It will stack fine if the tray is empty.
This is A 3x5x5 Gridfinity combo bin to hold both the Fanttik E2, and NEX E2 tool kits. I created the blank bin with Jose Galarza's OnShape Gridfinity Parametric Generator, then designed the cutout for the Fanttik tools in OnShape. The…
Blumentopf zum Ausdrucken Ich Empfehle eine Unterlage wen sie das Objekt mit PLA Drucken den in diesen Fall würde ich als Filament PETG weil es Wasserbeständiger.
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice You need the original Foxbat kit , plus the following: https://docs.google.com/spreadsheets/d/1KOiNNJb-DsYRX4Xing8HacSmP-WwXPeXNfO9-ASy6mA/edit?usp=sharing…
Lenshood for your Fujifilm Camera with this Lens. Its better then the original because you can loose the lenscap with force from the side. scale the cap in different sizes and prrint them out. you can print it bigger then it needs to be…
A simple upgrade for the HD-WF2 cover to enable to plug all the cables with the cover. printed in ASA with no supports.
Box to two Icom F29sdr radio's. You will need six M3x30 screws to assemble it.
I created a holder for the Fanttik F2 Master Rotary Tool for the ikea skadis wall. Support is required for the hooks. Print settings: Infill: 10% gyroid Layer height: 0,2 mm Filament: Prusament PETG
A low-profile exhaust pipe/tube adapter adapter (75 millimeters) for xTool F2 (and maybe xTool F2 Ultra) for all small home owners. Pipe tolerance are the same as the official xTool pipes. To avoid tolerance distortion I suggest to print…
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
