Fineliner Sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a decorative display stand for Stabilo pens. They have a diameter (flat sides) of 7.8mm, check if yours have…
- Rating
- 4.5 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 3
- Views
- 355
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a decorative display stand for Stabilo pens. They have a diameter (flat sides) of 7.8mm, check if yours have the same size before printing.
"sleeve.stl" is the base model, the other two have minor modifications for variety.
Printed pictures are "sleeve_bevels.stl".
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Notes:
Optimized for 0.4mm nozzles. Printed with 2 perimeters close to no infill should be needed. Check that wall are "gapfill"ed to save printing time.
Category: Containers