Soft TPU Head for Hyperice Hypervolt Massage Gun
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a larger diameter soft TPU head (5% infill) for the Hyperice Hypervolt Go 2 massage gun
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 56
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to have a softer head attachment for the Hypervolt Go 2. I wanted to be able to massage the tops of my feet or other areas where the bone is very close to the skin. The OEM head is way too hard for that in my opinion. I printed the whole head with 5% infill with white Inland TPU. I am reprinting again with the base infill at 25% so it doesn't compress as much but the top part is still at 5%. I've tested this out on a few different people and this head was a big improvement over sensitive areas.
Print settings:
0.4 nozzle
0.3 layer height
5% infill but you want to try +2% depending on your type of TPU filament
Organic supports
TPU filament
I have been using this for a few months and the TPU has held up well.