BavarianSimTec DDU5 and Control Center combo backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount the DDU5 on top of the Control Center from BavarianSimTec.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 72
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
If you want to mount the DDU5 on top of the Control Center from BavarianSimTec.
Use the spacer to make it flush in front, or skip it if you like the rear to be flush. The photos shows it with spacer installed.
All USB-C ports are available. The MagicArm must attached to the control center.
The MagicArm mount hole is available on the DDU5 as well but not intended for holding the whole assembly.
Installing the backplate
Control Center mount: Use the two short M3 screws provided with the DDU5 + MagicArm
DDU5 mount: Use two additional M3x10 screws when using the spacer. May need to be shorter without spacer.