Replacement magnetic peg for Melissa & Doug Switch & Spin Magnetic Gear Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement magnetic peg for the Melissa & Doug Switch & Spin Magnetic Gear Toy (DOUG-3745).
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 20
- Makes
- 1
- Views
- 363
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We needed a replacement peg for the Switch & Spin toy, so off to work I went and combined the most perfect five cylinders in just the right way to create it.
Print it with a layer pause at 2.60 mm and insert a 12x1.6mm magnet (the cutout is 12.5mmX2mm). Don't forget a small drop of superglue to hold it in place.
The finished peg has a slightly smaller base diameter than the original, because in the original it was the magnet that slips into the hole. With this design, the entire base slips into the hole. There are a few comparison pictures to see what I'm talking about.
I've included a .gcode file that works well for me so you can see print time and material estimates. It has some custom pause/resume code that I found more practical with OctoPrint than what PrusaSlicer provides out-of-the-box. My advice to you is never print someone else's gcode; best to always slice it yourself so it's going to work with your printer and your materials.
It seems like this product is no longer made, and is hard to find in North America. Here's a link to the manufacturer's site in SA: https://www.melissaanddougtoys.co.za/product/melissa-doug-switch-spin-magnetic-gear-toy/