1 / 3
TPU Feet for Rolohaun SimpleCore
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted to print some TPU feet instead of buying them, so here we are.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The feet sit up nicely against the skirts, so they will not rotate once attached.
BOM:
Qty 4 - M6 Nylock Hex Nuts
Qty 4 - M6x20 Hex Bolts or SHCS
Print Settings:
Material Used: Overture TPU 95A
Layer height: 0.2mm
Infill percentage: 15%
Infill type: gyroid
Wall count: 2
Solid top/bottom layers: 2
Supports: NONE
*These are the print settings that worked to my liking. You can of course modify based on how squishy you want the feet to be, or even use a softer TPU.