Book Binding Paper Punch Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cradle and awl punch guide for making custom book bindings.
- Rating
- 4.667 / 5
- Likes
- 48
- Downloads
- 283
- Makes
- 3
- Views
- 1,074
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by @werz99 Book Binding Cradle, this book-binding punch jig has hole pairs spaced for 10mm or 3/8in fabric tape every 25mm, ruler markings on both parts, ISO paper A and B-format size markings on cradle base for reference, end-wall for better registration of paper, and hook to maintain alignment of punch guide to cradle base. Total usable length 275mm. Sized for approx. 2mm max diameter on awl.
Pre-fold paper, place in cradle base aligning top edge with end wall, insert hole punch guide, and then use an awl to punch holes in each page. Assemble punched pages into signatures and sew together as needed for your amateur book binding adventure.
Printed in PETG with 0.2mm layer height. Parts fit individually on standard Mk3S platen when rotated diagonally. Punch guide prints best oriented on side as shown in sliced screencap.