1 / 1
Customizable Mudguard for Mountainbike
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable mudguard for mountainbikes. It´s attached via four cable ties.
- Rating
- 5 / 5
- Likes
- 152
- Downloads
- 669
- Makes
- 6
- Views
- 4,753
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Print it with a slightly flexible material, I used Extrudr ASA. Use a layer height of 0.3 mm. This will make the print three layers thick and sufficiently flexible for mounting. I have it mounted with the long side down, because I use an additional fender. But it can also be mounted in the opposite direction.