1 / 4

Sovol SV06 Plus BTT Eddy mount for V6 type volcano nozzle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

gbugdol

@gbugdol_1108466

Mount for BigTreeTech Eddy probe, for shorter volcano nozzle

Rating: 0 / 5
Likes: 2
Downloads: 10
Makes: 0
Views: 107
Reviews: 0

Updated at source: Feb 4, 2026

Model information

Source: Printables
Category: Other Printer Parts & Upgrades
License: Creative Commons — Attribution — Share Alike

Details Files (1)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (3)

Every mount for SV06 Plus that I've found was for the original 23.5mm nozzle. As I've switched long time ago to the shorter V6 type volcano nozzle (21mm), the Eddy probe was sitting too low.

Decided to remix Chinchill's design, as it seemed easiest to shorten cleanly. After cutting 2.55mm probing and tap works flawlessly with eddy-ng firmware.

Printed with PETG:

4 perimeters
30% infill
0.2mm layer height.

I've also mounted the probe front-faced to the extruder - according to BTT Eddy wiki this is better for the probe electronics:

Due to that, my probe offsets in the config are:

x_offset: 24
y_offset: -23