Box for ePaper + ESP32 Information Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for a 4.2" Waveshare ePaper display module.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 55
- Makes
- 0
- Views
- 754
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is an enclosure for a 4.2" Waveshare ePaper display module. I've connected the module to an ESP32 and it displays a bunch of information above my desk.
I put a rough guide to putting one of these together up on my blog.
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Supports: Yes
Resolution: 0.2mm
Notes:
The top should be printed with something like PETG. PLA is too rigid, and the tabs will likely break. The bottom can be printed in pretty much any material (I printed mine with PLA).
The top should be re-oriented so that it prints with the face down.
Both the top and bottom should be printed with supports.