1 / 3
Blender Foot Replacement / Mixer Fuss Ersatz — image 1
1 / 3

Blender Foot Replacement / Mixer Fuss Ersatz

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement foot for mixer type Hamilton Beach "RIO Barblender HBB250-CE"

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
32
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

EN:

A base has been lost from a mixer "RIO Barblender HBB250-CE" of the brand Hamilton Beach

Here is a replacement for it. I initially tried 85A, as I had recently experienced issues with Filaflex 70A. The filament kept getting tangled in the extruder. However, 85A is significantly harder than the original base. So I tried again, and this time, in addition to the usual requirements such as loosening the pressure screw on the extruder and adapting the profile, I also increased the nozzle temperature, which should be 215-235°C as specified, to 240°, and lo and behold, it worked. PS: do not forget to apply glue on the sheet when use smooth PEI-sheet...

Material: TPU either Filaflex 70A or Eryone TPU 85A

Layers: 0.2mm

Supports: none

ĶKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK

DE:

Bei einem Mixer "RIO Barblender HBB250-CE"der Marke Hamilton Beach, ist ein Standfuß verloren gegangen.

Hier der Ersatz dafür. Hatte es zunächst mit 85A versucht, da ich zuletzt Probleme mit dem Filaflex 70A hatte. Dabei hat sich immer das Filament im Extruder verwickelt. 85A ist aber deutlich härter als der Originalfuß. Habe es daher auch wieder versucht und diesmal außer den sonst üblichen Erfordernissen wie Lockerung der Anpreßschraube am Extruder und Adaptation des Profils auch zusätzlich die Düsentemperatur, die wie angegeben 215-235°C sein sollte, auf 240 erhöht, und siehe da, es klappte. PS: nicht vergessen Kleber mit Stift auf die Druckplatte aufzutragen, wenn Sie glattes PEI-Druckblech verwenden...

Material: TPU entweder Filaflex 70A oder Eryone TPU 85A

Schichten:0.2mm

Stützen: keine

Tags