1 / 2
First Layer Calibration and Live Z  in 5 minutes — image 1
1 / 2

First Layer Calibration and Live Z in 5 minutes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the most important first print you need to print. It will allow you to Live adjust Z Hight.

Rating
5 / 5
Likes
38
Downloads
608
Makes
5
Views
2,648
Reviews
5

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial

This is the most important first print you need to print.
It will allow you to Live adjust Z Hight.
Very short print.

In 5 minutes you will set the printer to print beautiful models.

It is set to test PLA or PETG.
If you use the stl, please use the settings as pictured so it will start printing near you and inside.
 

The bottom of the picture is correct height.

Just above is too high
Above that is too low

and top is almost OK


Good Luck

Tags