Pellet Smoker Bucket Sift
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a 2 piece printable sift for wood pellet storage.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Wanted to make a 2 piece pellet smoker sift for my 20L bucket.
It has a diameter of 255mm, so it maxes out my printer size. Print the pellet smoker sift top to check if it fits your bucket.
For the bottom part of the sift you can either use a wire or a few m3 screws with locking nuts to be able to lift it out for cleaning, like in the image.
Lots of holes cause why not.
Will provide step file if you wish to edit.
For Australians i tried the bunnings 20L one, but the internal diameter is too large for it to fit, i went with the repco one since its a little over 255 inner diameter, and can come with a gasket twist on lid to seal it.
Thanks