1 / 20
Karcher WD3 / WD4 Vacuum Hose Extension Adapter with Swivel & Locking Button — image 1
1 / 20

Karcher WD3 / WD4 Vacuum Hose Extension Adapter with Swivel & Locking Button

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Extend your reach and eliminate tangled hoses with this custom adapter!This is a robust, 3D-printed extension hose…

Rating
5 / 5
Likes
35
Downloads
226
Makes
1
Views
972
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Extend your reach and eliminate tangled hoses with this custom adapter!

This is a robust, 3D-printed extension hose adapter designed specifically forKarcher WD3, WD4, and compatible wet/dry vacuum cleaners. It replicates the original quick-connect system with a crucial upgrade:free-rotating swivel joints on both ends to completely prevent hose kinking during use.

Key Features

***Dual 360° Swivel:** Both connections rotate freely, allowing the main hose and extension to move independently. No more twisting or straining of hoses. ***Functional Locking Button:** Features a separate, spring-loaded button that securely locks the adapter into the vacuum port, just like the original hose. ***Universal Hose Connector:** A single connector part adapts the standard 40mm flexible hose to both ends of the system. ***Perfect Compatibility:** The male_body plugs into your vacuum, and the female_body accepts your original Karcher hose seamlessly. ***Modular & Printable:** Split into 4 logical parts for easy printing without complex supports.

File List & Purpose

File Name

Quantity Needed

Purpose

male_body.stl

1

The main plug that inserts into the vacuum cleaner. Houses the locking button.

button.stl

1

The separate locking button.Print on its side!

hose_connector.stl

2

The universal adapter that screws onto the 40mm hose. One for each end.

female_body.stl

1

The receiver port for your original Karcher hose. Contains the second swivel joint.

Material

***PETG is recommended.** It offers the perfect balance of strength, durability, and slight flexibility needed for a vacuum-tight seal and a functional button.

Printer Settings

***Layer Height:** 0.15mm ***Infill:** 15% for all parts. ***Walls/Perimeters:** 2 minimum, I use 3

Part-Specific Instructions & Orientation

Part

Orientation

Supports

Critical Note

male_body.stl

Upright (as oriented in slicer)

NO

Standard printing.

female_body.stl

Upright (as oriented in slicer)

YES (one small overhang)

Standard printing.

button.stl

ON ITS SIDE

YES

This is critical! Layer lines must run along the button's length for flexibility.

hose_connector.stl

Vertical (standing on flange)

NO

Standard printing.

Tolerance Note

The hose_connector parts are designed for avery tight press-fit into the main bodies (male_body and female_body) to ensure a perfect vacuum seal.

***Expect a tight fit.**

  • The use of a clamp/vice for final assembly is normal.

What You'll Need

  1. (Optional) Silicone sealant for a guaranteed seal.

  2. (Optional) Clamp or soft-jaw vice for pressing parts together.

Step-by-Step Assembly

  1. Prepare the Hose: Screw two hose_connector parts onto both ends of your 40mm flexible hose. Hand-tighten firmly.

  2. Install the Button: Slide the button into its dovetail slot on the male_body. Should fit tightly, maybe use some glue to fix it.

  3. Assemble Male End: Firmly press one of the hose_connector assemblies into the male_body. A clamp can be very helpful here.

  4. Assemble Female End: Repeat the process, pressing the second hose_connector assembly into the female_body.

  5. Final Connection: Your extension is ready! Plug the male_body into the vacuum port (you should hear the button click). Insert the original Karcher hose into the female_body port.

Happy printing and cleaning! I appreciate your feedback and makes.

Tags