Karcher WD3 / WD4 Vacuum Hose Extension Adapter with Swivel & Locking Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extend your reach and eliminate tangled hoses with this custom adapter!This is a robust, 3D-printed extension hose…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 238
- Wydruki
- 1
- Wyświetlenia
- 1014
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Extend your reach and eliminate tangled hoses with this custom adapter!
This is a robust, 3D-printed extension hose adapter designed specifically forKarcher WD3, WD4, and compatible wet/dry vacuum cleaners. It replicates the original quick-connect system with a crucial upgrade:free-rotating swivel joints on both ends to completely prevent hose kinking during use.
Key Features
***Dual 360° Swivel:** Both connections rotate freely, allowing the main hose and extension to move independently. No more twisting or straining of hoses. ***Functional Locking Button:** Features a separate, spring-loaded button that securely locks the adapter into the vacuum port, just like the original hose. ***Universal Hose Connector:** A single connector part adapts the standard 40mm flexible hose to both ends of the system. ***Perfect Compatibility:** The male_body plugs into your vacuum, and the female_body accepts your original Karcher hose seamlessly. ***Modular & Printable:** Split into 4 logical parts for easy printing without complex supports.
File List & Purpose
File Name | Quantity Needed | Purpose |
|---|---|---|
male_body.stl | 1 | The main plug that inserts into the vacuum cleaner. Houses the locking button. |
button.stl | 1 | The separate locking button.Print on its side! |
hose_connector.stl | 2 | The universal adapter that screws onto the 40mm hose. One for each end. |
female_body.stl | 1 | The receiver port for your original Karcher hose. Contains the second swivel joint. |
Material
***PETG is recommended.** It offers the perfect balance of strength, durability, and slight flexibility needed for a vacuum-tight seal and a functional button.
Printer Settings
***Layer Height:** 0.15mm ***Infill:** 15% for all parts. ***Walls/Perimeters:** 2 minimum, I use 3
Part-Specific Instructions & Orientation
Part | Orientation | Supports | Critical Note |
|---|---|---|---|
male_body.stl | Upright (as oriented in slicer) | NO | Standard printing. |
female_body.stl | Upright (as oriented in slicer) | YES (one small overhang) | Standard printing. |
button.stl | ON ITS SIDE | YES | This is critical! Layer lines must run along the button's length for flexibility. |
hose_connector.stl | Vertical (standing on flange) | NO | Standard printing. |
Tolerance Note
The hose_connector parts are designed for avery tight press-fit into the main bodies (male_body and female_body) to ensure a perfect vacuum seal.
***Expect a tight fit.**
The use of a clamp/vice for final assembly is normal.
What You'll Need
(Optional) Silicone sealant for a guaranteed seal.
(Optional) Clamp or soft-jaw vice for pressing parts together.
Step-by-Step Assembly
Prepare the Hose: Screw two hose_connector parts onto both ends of your 40mm flexible hose. Hand-tighten firmly.
Install the Button: Slide the button into its dovetail slot on the male_body. Should fit tightly, maybe use some glue to fix it.
Assemble Male End: Firmly press one of the hose_connector assemblies into the male_body. A clamp can be very helpful here.
Assemble Female End: Repeat the process, pressing the second hose_connector assembly into the female_body.
Final Connection: Your extension is ready! Plug the male_body into the vacuum port (you should hear the button click). Insert the original Karcher hose into the female_body port.
Happy printing and cleaning! I appreciate your feedback and makes.
