V-TAC VT-615 Ceiling Lamp Replacement Clip (Built-in Supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replacement for the broken clip
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
V-TAC VT-615 Ceiling Lamp Replacement Clip (Built-in Supports)
I designed this version specifically to solve the "snapping plastic" issue while making the printing process as seamless as possible.
Key Features
Built-in Supports: The model includes a sacrificial support structure for the hinge area. No need to mess with slicer-generated supports; just print and snap the support piece off after.
Reinforced Geometry: Optimized for 3D printing to be more durable than the original injection-molded part.
Technical Specifications & Print Settings
Material: PETG, ASA, or ABS. Technically you should avoid PLA, as the heat from the LED housing and the constant spring tension can cause it to warp or "creep" over time, but as this is a ~15 minute print, PLA is also fine
Walls/Perimeters: 4-6 (This ensures the hinge pin and spring seat are solid plastic).
Layer Height: 0.15mm - 0.2mm for detail in the hinge mechanism.
Post-Processing
Remove the part from the print bed.
Snap off the integrated support block in the hinge gap (highlighted in the CAD render).
Transfer the metal spring with the pin from the original broken clip.
Install and snap back into the ceiling!