Counting matching models…
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
Motivation I want to use solar panels of an old solar system (Conergy C175M) in combination with a Microinverter for a balcony power plant. [A: Panel groups connected in parallel] As the panels have low power values (compared to current…
hi, a simple cam mount a small one and a long one. Warning ! you can only put them on the right side of the Printer, on the left it will hit the bed
hi, i am doing a rework of the wolf cart SV3 at the moment. So i created some of the normally alu/iron crafted parts with PETG. Works fine :)! Happy printing! I did the following version of the part: Original replacement - diameter:…
This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Very easy stand design for Omada AX1800 (EAP615) Wall Plate WiFi 6 Access Point Other materials than 3D printed models? Two M3 bolts
The EAP615-Wall (as the name suggest) is meant to be mounted at a wall. But for our purposes, this wall mounting was no option and the device had to be placed on a desk or other furniture. It is printed in two parts which have to be…
This model is compatible with the lego system.
2x1 Wall tiles, printed in ASA.
Thanks to D4rk Helmet for the original model. Created this remix to reduce printing costs with the 3D printing service providers that I took into consideration (I do not own a printer myself, so I have to rely on these) - the original…
This drone really prints and really flys with real store-bought parts!!! Needs: 4x 615 motors. 2x counter-clockwise and 2x clockwise. 1x AIO 1s Flight Controller. (I would like to put a BetaFPV F4 in this drone but I only have a BeeCore…
The bubble-pack these bits came in isn't a great toolbox carrier for 'em, and they're so small, they get lost very easily. This small sliding drawer box has a friction-stop when closed. It fits the Harbor Freight 61526 drill bits pretty…
This model is compatible with the lego system.
This adapter gives you more room to mount a TP Link EAP615 to a wall outlet. It is designed for M3 brass inserts. You need 2x m3 inserts and M3 screws, to mount the bracket from the Accesspoint. The Screws to screw it on the wall outlet…
This model is compatible with the lego system.
The retaining nut on my Chefs Choice food slicer broke. I originally tried (for 3 years) to get a new part from the manufacturer with no success. I was about ready to send it to the landfill. I then purchased a 3d Printer and found the…
I misplaced the blade fastening screw for my Chef's Choice 615 Electric Meat Slicer. I made a replacement part to match based on measurements (I did not have the original part to compare to). So this is not a 100% exact match but it…
Logitech camera mount for 2020 tubing. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: No Supports: No Resolution: .25 Infill: 70% Notes: Printed in ABS Print with 4 shells and 4 layers top and bottom for added…
printing works with nozzle size up to 0.6mm and layer height 0.32mm spacer can be fixed to wall with screws or double sided tape using the flat area flat wall model does not need supports for wall corner models the use of automatic…
Simple camera mount for Voron no supports needed Necessary screws: 3x M3x8 1x M3x20 2x M3 hammer nut
This model is compatible with the lego system.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Took D Rogers swivel geometry and added it to Geisterfleck's mount so that the swivel could be kept in tact to minimize possible damage to the cameras main body. For more details about removing the stock mount see D Rogers original make…
Overview This is a simple mount I designed to mount the Logitech C615 webcam to my Ender 5 printer. This contains two parts, a mount and a printable thumbscrew to fix the webcam to the mounting plate. I printed these both with PETG. The…
This model is compatible with the lego system.
Lowered the camera mount to allow for the Logitech C615 camera to sit further down and have better visibility of the nozzle. Screw the whole camera mount in with the printed screw. Printed on its side with supports at .2 layer height in…
This is a remix (kinda) to adjust the original file to fit a Logitech C615 web cam.
I originally bought this camera to use with Octoprint, however I did not like the auto-focus. So I went back to using the ol' trusty C270 for Octoprint and decided to use the C615 for my work web cam. I use a TV mounted on the wall as my…
I have a Logitech C615 on top of my monitor that I use for work, but I'm uncomfortable with the idea that someone might be able to turn it on when I'm not aware, so I like to keep something covering the lens. I've been using a 3"x5" card…
A fairly simple camera clip/mount for a Logitech C615. This clip is not “tight” on the camera, but holds it well enough for the purpose. I separated the entire base from the camera (pictured) to fit in this bracket. There is plenty of…
I took @Jason_46009 's modification of the c615 camera mount, and modified it to use either an m3 nut or an m3 threaded insert for the hinge pin. You will need a 20mm m3 screw and either an m3 nut or an m3 threaded insert. Printed in ABS…
I created a Logitech C615 mount made out of two printed plates that sandwich the base of the webcam. The webcam has a rubberized non-uniform shape that one plate squeezes against so I tried to design a bracket to fit that. I have been…
I needed a pegboard holder for my Centech 61593 multimeter. It's nice for the price (I got it at Harbor Freight) but too bulky to fit in any of the existing multimeter pegboard projects I found. It would also make for a decent 'cup' for…
Adding a light to my 3d printer adds lens flare to my Logitech C615. This lens hood slides right on and solves the problem Print instructions Supports: Yes Resolution: .2
2020 extrusion mount for the logitech C615 webcam using 2x m5x10 flathead bolts and m5 t-nuts. Remixed using the screw from Cyber40014's C615 wall mount. Recommend printing screw at a low layor height to preserve thread accuracy.
I originally used the Logitech C270 Camera with this arm: https://www.printables.com/model/144327-logitech-c270-camera-mount-for-prusa-mk2s-and-mk3-/files When I switched to a C615, I wanted to re-use the arm and mount. The base of the…
I've gone through a few different versions trying to get a gasket that will properly seal the hose end and the quick connect end. This is by far not perfect. But it does seal using 95a Overture TPU. I will probably revise this design in…
Long story short, I had a crappy camera mount that I had this C615 camera on and it wasn't working out. I found In3DSpace 's C270 mount , like so many others, and thought it would be perfect. Only I'm an idiot and my camera isn't a C270…
This is a remix of the Logitech C615 camera mount for the Prusa Core One that does not require completely removing the post from the camera. While it is possible to completely remove the post, it's easy to damage the camera to accomplish…
This remix fixes the following issues: Fragile locking tab: The original tab was too thin and prone to breaking; it has been reinforced. Internal height: The original clearance was insufficient and crushed the ear pads. This version…
I was quite unsatisfied with the camera positions I could achieve with the articulated stand. Although brilliant in normal use, it fails to get the lens close to the frame or at a good angle without bumping into the print head. So I made…
Print two copies of the model (one for each side) and attach to the PDU with the included brackets and 4-8 M3 machine screws (I used M3x6mm). NOTE you may need quite a bit of space to angle this & fit it into your rack, so make it one of…
A 3D topographic map just outside of Valdez, Alaska centered on my home. Located at BP61xb | 61.061533 -146.001906.
I just created a stepper motor adapter mount for the great camera mount by @manifest3r Print Settings Printer: Voxelab Aquila Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: eSun PLA+ Black Category: 3D Printer Accessories
This is an Internal Chassis replacement for the wide "pizza-box" style Apple Macintosh computers from the 90s that included an internal CD-ROM drive. Specifically, this part is for the Centris 610, Centris 660AV, Quadra 610, Quadra 660AV,…
Holder for Orange R615x r/c receiver. Holes spacing for Actobotics beam Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: medium Infill: 20% Notes: Sliced with Simplify3D How I…
Wall plate adapter for TP link to point the AP 25 Degrees to focus RF energy in a certain direction.
I made this case for the Logitech C615 because the ¼" mounting was wobbly. This uses a M3 insert to mount instead. I used this mount for the SV06: https://www.printables.com/model/444498-sv06plus-camera-mount Requires: Soldering of one…
I printed it with supports for the pins. Material - PETG
I designed a custom 3d printed mount for a replacement battery from vhbw for Sony's dualshock 3 controller. Fits VX3.0 and VX5.0 controller revisions (and possibly others, couldn't test that). Printed in PLA with 0.15 layer height…
Ich habe meinen Halter aus PLA gedruckt. PETG oder ABS wären sicherlich besser. Warum PLA? Nun, ich dachte, ich müsste die Halterung noch anpassen. Die Halterung passte jedoch beim ersten Versuch - und wurde montiert. Seitdem Moment hängt…
This is a 3D-printable replacement for PLAYMOBIL part 3007615 / 30076150 , the 1-wide rectangular castle walkway floor / Wehrgang used in the classic PLAYMOBIL Steck construction system. The original part can be found in classic medieval…
I hate it when I go around with my laptop during meetings and always have to ensure that the wireless dongle does not hang around and stresses the USB port. This ugly gadget was my first design in tinkercad. It looks like sh** but works…
Print main part with support. Additional material: 1 M3 square nut 1 M3x12 countersunk screw 2 M4x20 flat head screws Openscad and STL files can also be found at https://github.com/tsbogend/3dprints/tree/master/eap615-mount
Needed a mount for C615 webcam for timelapse. This uses the rods inside the Elegoo 3D Printer enclosure to hold the mount. It uses a ¼-20 screw to keep the mount in place on the rod, and another ¼-20 screw for the webcam. Printed in…
This generic air angle grinder is fairly common in the aircraft maintenance industry, and is typically used with a variety of grinding, sanding, and polishing discs. I included a recess for the wrenches that are included with it, and are…
VW Passat 32B Zwischenstück Angstgriff VAG Teilenummer: 321 857 615 BLH 1 / 2 / 3
That bright LED on my Honeywell HEV615WC humidifier was driving me crazy at night. So, I designed this simple light-blocker. Works like a charm! Dark-colored filament is your friend for this project.
Print as oriented This clip is not “tight” on the camera, but holds it well enough for the purpose. You will need to separate it from the base to fit in this bracket. There is plenty of room behind the camera in the clip for its cable.…
I needed to mount the power adapter for my work Chromebook under my desk but I couldn't find any that fit correctly, so I made this one, it is a perfect fit, slides in easily and the bracket can be used to bolt down the power adapter and…
V-TAC VT-615 Ceiling Lamp Replacement Clip (Built-in Supports) I designed this version specifically to solve the "snapping plastic" issue while making the printing process as seamless as possible. Key Features Built-in Supports: The model…
A small but mighty bracket that will support your EGO 615 Leaf Cannon. Please screw it into a stud!
Absaugung für Elu MOF 96 bzw. DeWalt DW 615
Parametric 7.6cm tall object with rounded circular geometry and a weave pattern. Engineered for precise 3D printing.
Mount for my AOG AIO Micro board Enclosure. Mounts in the fuse box area behind the seat.
One day I was asked to make a cover (mount) for the SEVEN camera, which I did.
That bright LED on my Honeywell HEV615WC humidifier was driving me crazy at night. So, I designed this simple light-blocker. Works like a charm! Dark-colored filament is your friend for this project.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
This model is compatible with the lego system.
This model is compatible with the lego system.
this is a lego 55615 but at a 45°angle instead of a 90°angle. it doesn't have supports. I would highly appreciate it if you post any makes, because i don't have a 3D printer yet and would love to see how this looks printed. enjoy!
Mount for my AOG AIO Micro board Enclosure. Mounts in the fuse box area behind the seat.
M40 and M32 male adapter for DeWalt angle grinder DWE46150 125 mm polishing attachment I printed it in PETG I modeled the DeWalt adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the…
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Print as shown on the picture for better tolerances. 4pcs countersink M3x20 4pcs M3 nuts 4pcs countersink M3.5 screws
I have a 2003 Ford Focus ZX3. The pin holding hatch trim/package tray string has broken several times. I've bought replacements but they are always hard to find and expensive on ebay. It is a poor design. Purchasing a new one is about…
this is a lego 55615 but at a 45°angle instead of a 90°angle. it doesn't have supports. i it can be used for making ramps, roofs or whatever. (this isn't a piece you'll find in any lego kit!). I would highly appreciate it if you post any…
this is a lego 55615 but at a 45°angle instead of a 90°angle. it doesn't have supports. I would highly appreciate it if you post any makes, because i don't have a 3D printer yet and would love to see how this looks printed. enjoy!
This is a Lego 55615 but at a 15°angle. its like my Lego Technic compatible 45°angle 55615, but at a gentler slope; this makes it better for ramps.
ORGANIZZATORE GT615 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
I have a weird wall near my electrical closet which fits a LAN cable nicely, so I made this simple plate so I didn't have to mess around with screws and holes.
Work In Progress, not yet printed Roco 0918S Replacement housing for 0615S Motor Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.12 Infill: 100 Filament: PolyMaker PLA Notes: Work In Progress,…
Allows for use of a 1.25" vacuum to work with the DNP615 vacuum port for Dewalt routers
Replaces the spacer around the USB port to brace it against cable insertion force.
I wanted to put this AP outdoor, even though it's not outdoor rated (do it at your own risk, of course), the place where it's mounted already has a roof, to it will not rain on it, but this mount will protect it even more. I've also…
Ein Halter für den VW OBD Stecker VAS 6154 der mit Schrauben oder mit doppelseitigen Klebeband befestigt werden kann.
New Paddle designed and shared at: Clocking Holster Paddle by Sheisster | Download free STL model | Printables.com Paddle and cogs are remix from FileFoundry's PT-111 Holster files. Holster is designed with a finger release and easy mount…
This is the helical gear for Dewert 61563 linear actuator. This gear is moved by the endless screw of the electrical motor and often breaks. I printed this in PA-CF to achieve enough strenght to support the movements of the medical bed.…
This model is compatible with the lego system.
