Rugged Power Bank Box - Kepswin 49800 mAh Portable Phone Charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kepswin 49800 mAh Portable Phone Charger Box
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 44
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is the Rugged Container for the Kepswin 49800 mAh Portable Phone Charger. It is and inexpensive ($24.00) power bank that my family has purchased 4 times in 2025. At this size, I am able to charge my phone 6 + times without recharging the charger. Here's the LINK if you are interested. The box can also be used for many other things. *this is not an affiliate link.

Interior Measurements
32mm Height
70mm Width
144.5mm Length
Filaments
I used Prusament Orange and Black PETG filaments. I recommend PETG filament to maintain rigidity and to be waterproof (when using the provided gaskets).
PETG - 4 Walls, 20% Gyroid Infill
TPU - 4 Walls, 20% Gyroid Infill
I've also added and 2 extra TPU pads for the ultimate fit, only one is needed. They come in Basic and Honeycomb shapes that I use for the bottom lining of the case.. The TPU I used is 95A.
Parts Required
M3x30mm Hex socket head bolts Amazon link
M3x.5 nylon insert lock nuts Amazon link
These are not affiliate accounts.
Assembly
This is pretty straight forward, and the photos will show you which direction to install the bolts. I used locking nuts to get a secure "locking" fit.