Darts Ring Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
DIY Darts Ring Light
This is a custom-built DIY ring light designed for a standard dartboard (Winmau Blade 6)
Dimensions: 540 mm (Outer Diameter)
Compatibility: Designed for dartboards with a 450 mm outer diameter.
Lighting: 170 mm x 1 mm LED strip segments & matching power supply
Components: 8 x Ring segments and 9 x Support brackets.
Hardware: 9 x 3 mm x 12 mm screws
Hotglue
Assembly & Installation: The ring consists of eight separate segments joined together by nine brackets. These brackets are strategically positioned to screw into pre-drilled holes at the connection points, effectively covering the seams. Then the LED strip is permanently fixed to the inner rim of the ring light using hot glue. The ring is held securely in place by the foam protection ring.
Electronics: I used a 24 V Power supply and added a "Switchbot Relay Switch 1pm" so i can connect it to my SmartHome and also control it with a button.
For some the ring light is a little small, but i build it with the things i got at hand. Happy printing.