Case for gusmanb Logic Analyzer with Rechargeable Battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the logic analyzer designed by gusmanb on github. Offers compartments to extend it with a battery.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a case I created for the logic analyzer designed by gusmanb on github. (https://github.com/gusmanb/logicanalyzer). I use the version 6.0 PCB ordered from PCBWay. I extended it to be battery powered using a lipo cell.
I used the following parts:
Logic analyzer pcb V6.0
Raspberry Pico2W
1200mAh LiPo Cell (52x34x6mm)
USB C LiPo boost, protection, and charge board with charge indicator LED (see images)
Switch for 4mm hole diameter
The LiPo is soldered directly to the charge controller and the output of the charge controller is connected to the GND and VBUS pins of the RasPi Pico via the switch.
I printed it without supports in PETG.