1 / 8
Voron-Style Qi2 Magnetic Charging Stand (Pixel 10 Pro) — image 1
1 / 8

Voron-Style Qi2 Magnetic Charging Stand (Pixel 10 Pro)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Voron-style Qi2 charging stand for Pixel 10 Pro. Features a weighted base and hidden cable routing.

Rating
5 / 5
Likes
5
Downloads
33
Makes
1
Views
273
Reviews
1

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

Voron-Style Qi2 Magnetic Charging Stand (Pixel 10 Pro)

Inspired by the industrial, functional design language of Voron 3D printers, I designed this desktop stand to take advantage of the new Qi2 wireless charging standard.

I created this specifically for my Pixel 10 Pro to reduce wear and tear on the USB-C port during daily use. The stand features a weighted base for stability and integrated cable management for a clean setup. While designed for the Pixel, it should work with any Qi2/MagSafe-compatible device.

🔩 Bill of Materials (BOM)

To complete this build, you will need the following hardware:

  • 1x Baseus 15W Magnetic Wireless Charger Qi2

  • Ballast Material: Small lead balls, steel BBs, sand, etc. to fill the weight compartment.

🖨 Print Settings

  • Material: tested with PETG (PLA or ABS/ASA will also work).

  • Layer Height: 0.2 mm

  • Line Width: 0.4 mm

  • Infill: 20%

  • Wall Ordering: Inner-Outer-Inner (Important for dimensional accuracy).

  • Supports: Recommended for longer bridges.

    • Note: If your printer is well-tuned for bridging, you may be able to print this support-free.

🛠 Assembly Instructions

  1. Print all parts: Refer to the screenshots for the recommended orientation on the build plate.

  2. Post-Processing: Remove any supports and/or brims.

  3. Prepare the weight container: Fill the hollow weight container with your ballast material (I used small lead balls).

  4. Seal the weight container: Close the weight container using the printed screw plug.

  5. Install Charger: Push the Qi2 charger into the main base part. It should fit snugly.

  6. Route Cable: Snap the cable cover part into place to hide the wire.

  7. Final Assembly: Push the weighted container into the base of the stand.

Tags