cr-touch mount Voron Legacy/dragonburner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an alternate mount for the dragonburner toolhead for a cr touch placed behind the nozzle for more build volume.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
This is an alternate mount for the dragonburner toolhead on a voron Legacy for a cr touch placed behind the nozzle for more build volume.
Currently printed and put in place but untested.
I had to sand the sides of the cr-touch top plate to make it fit (about 1-2mm on each side). It doesn't reach the two holes for the mount so the structural integrity is not affected. The reason behind this is I wanted to keep the same width has the original mount.
I also made an other version for a larger endswitch that goes between the rods. If someone' interested I can post it.