cr-touch mount Voron Legacy/dragonburner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alternate mount for the dragonburner toolhead for a cr touch placed behind the nozzle for more build volume.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is an alternate mount for the dragonburner toolhead on a voron Legacy for a cr touch placed behind the nozzle for more build volume.
Currently printed and put in place but untested.
I had to sand the sides of the cr-touch top plate to make it fit (about 1-2mm on each side). It doesn't reach the two holes for the mount so the structural integrity is not affected. The reason behind this is I wanted to keep the same width has the original mount.
I also made an other version for a larger endswitch that goes between the rods. If someone' interested I can post it.