1 / 2
OpenDTU ESP32 + CMT Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for an openDTU or Ahoy DTU ESP32 + CMT
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case can hold an ESP + CMT radio with external antenna which is build with jumper cables and the mini board.
Some ventilation holes can be easily added in the slicer following your personal design ideas.
E.g. on the picture I added a 30x25 cube with a 20% line infill and no base and top layer
Printed with 0.32mm layer height and 0.6er nozzle. But can also be printed with the default nozzle and usual layer height. But works also great with the other settings.