Shapely Tronxy X3 legs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Give your Tronxy X3 printer a lift by adding these shapely legs. Lifts it high enough (80mm) to have the control box…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Give your Tronxy X3 printer a lift by adding these shapely legs. Lifts it high enough (80mm) to have the control box fit under it.
Not a perfect solution, but it's good enough.
UPDATE: Added per request an even taller one. This elevates the printer 115mms from the very bottom.
Print Settings
Printer:
Tronxy X3
Rafts:
No
Supports:
No
Resolution:
0.2-0.25mm
Infill:
20% honeycomb
Notes:
3 perimeters or shells. Use a brim if your parts do not stick well to your bed.
M3 and M4 versions only changes the hole size.About 7h35m for a set.
Post-Printing
To attach, you need 8 total (2 per leg) 8-12mm M3 or M4 screws with same size drop in T-nuts.
Category: 3D Printer Parts