Panavise "Soft Jaw" Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters for magnetic tubular "soft jaws"
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These adapters are designed to work with the "soft jaws" linked below which are good for doing fine work on suspension fork/shock dampers, etc or other tubular items. You'll still need a bench vice or stand for removing air chambers or any other high torque work. They use 12mm X 3mm magnets to mate with the soft jaws. Holes support 3mm x 8 - 12mm machine screws for their permanent attachment. These attach to the vise with the stock screws. They can also be used by themselves as longer clamps, but being plastic, YMMV.
These 3mm x 12mm magnets work, but they're not great. At most they keep the soft jaws from falling off. https://a.co/d/fzQdgc7
I printed these in PLA+ .20 Strength.