Parametric spice packet holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OpenSCAD model to organize small spice packets in kitchen or fridge designed to be printed in vase mode.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
OpenSCAD model to organize small spice packets in kitchen or fridge designed to be printed in vase mode.
I recommend a 0.8mm nozzle so it is sturdy enough. If you only have a 0.4mm nozzle, either reduce the thickness to 0.4mm, or edit the model in your slicer to use the "Internal geometry via slits" trick so you can have both an external and an internal perimeter despite vase mode.
Provided STLs all fit on the Prusa Mini (18mm×18mm). Some of them need to be rotated and the skirt distance reduced from 3 to 2mm.