Fostex TxxRP -Improved- Headbend Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original clamp started slipping a lot over time so this print solves that.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- GNU General Public License v3.0
You will need 8 heat inserts to assemble it properly, designed for Voron spec heatset inserts and headband in pictures is for "SteelSeries Arctis Nova Pro/Nova 7 Nova 3" on Aliexpress.
Cans did not fit properly (did not cover bottom of my ears) on my head so I added 15 degrees angle on both sides and now it fits nicely.
PARTS:
8x M3x5x4mm Heatinsert
2x M3x16mm OR 2x M3x25mm for angled version
6x M2x8mmBE CAREFUL IF REMOVING PRINTED PARTS FROM HANDBAND BECAUSE THE RUBBER CAN BE EASILY RIPPED OFF (Ask me how I know)
If you have Fostex T20 with planar speakers check out adapter I made:
https://cults3d.com/en/3d-model/gadget/fostex-t20-drivers-conversion-rpx-dzefr1
