15 models
Fostex T50RP headphones are very tough, but one place many fail is where the adjustable headband mounts to the ear cups using a pivot. The metal headband rods can twist themselves loose from the pivot and the cup will fall off. Left in an…
Comfort straps inspired by @CapraAudio design. The screw-in version can be installed the same way as other MrSpeakers-style straps. I recommend finding longer screws as the stock ones will barely reach the threads on the adjustment arm.…
Summary: I designed this mod since I wanted to be able to replace the cable on my Denon D2000 and D5000 but didn't want to permanently modify the frame, baffle or driver. This would allow me to go back to the stock cable is so desired.…
this design uses a M3 nut and a M3x ~10mm socket head cap screw. It might also work with the T40 and T60 headphones
Replaces the pleather headband found on the mk3 models of the Fostex T20RP, T40RP, and T50RP as it is known to flake to pieces. This is printed in multiple parts to avoid large overhangs in the TPU when printing and to allow for…
Replacement earcup mount for the Fostex TR-X00 headphones from Drop. Story: In 2020, a friend of mine's brother accidentally sat down on his headphones and snapped off the hinge section on his TR-X00. I was asked if I could remake the…
Should of course also work on T30/T40. Print the two parts and screw them on the rails of the T50RP. The screw hole has a diameter of 2.5mm. Works well with a ~12cm 90deg to 0deg 3.5mm cable between Fostex and Fiio.
Front slider cover for Fostex T50rp, T40rp, T20rp
Fostex Style yokes and arms for the capra headband to support a variety of circular cup sizes. These will work for the Satyr 3 or the DMS Omega for example, and any other headphones that use circular cups. - Requires one M4 15mm…
The goal of this project is to create a vertical omnidirectional speaker using a 3” full range speaker that can be printed in Ender3. A transparent vinyl sheet (1.5 mm thick) was rolled up to form the body of the vertical speaker. The…
Just a small design inspired by the Decware DFR8 phase plug for the Fostex FE206En. This is not by any means the exact copy... it's just my model that i experimented on to sound quite nice Update Mid October 2021: i uploaded newer…
Based on decware pictures and a lot of experimentation this is a release of phase plug for the new NV version Printed in PETG but PLA should work aswell
Custom design to allow a ModMic to sit perfectly on my Open Alpha headphones (Alpha Dog open source design), the plastic on the Fostex T50 is too smooth to allow a good bond with the original mounting hardware. Snaps on and off securely…
You will need 8 heat inserts to assemble it properly, designed for Voron spec heatset inserts and headband in pictures is for " SteelSeries Arctis Nova Pro/Nova 7 Nova 3 " on Aliexpress. Cans did not fit properly (did not cover bottom of…
Tested on Denon AH-D2000 HiFi Headphones. Created to replace broken driver assembly / mount 3rd party driver into AH-D2000 housing. I know Denon is using a lot of Fostex parts, so it might work with Fostex headphones too. Careful with the…
