1 / 3
ImpulseRC Apex HD DC DJI 03 camera mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
camera mount for the DJI 03 air unit with a protective cage.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 57
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Print the protective cage out of PETG or ABS. 2 versions available. one for m3 heat set inserts with 4mm holes and one for direct screwing (for the lunatics) with m3 holes.
Print the gummies out of TPU. one for each side. no mirroring required.
PRINT ALL PARTS AS IS FOR OPTIMAL STRENGTH.
i recommend at least 4 walls and 100% infill.
will probably need supports for the cage