Creality K1 Nozzle wipe - CFS mod version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for A1-style silicon nozzle wipe on a Creality K1 with the CFS upgrade. Not verified on K1C and K1Max
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder for A1-style silicon nozzle wipe on a Creality K1 with the CFS upgrade.
This also stops the nozzle from crashing in to the build plate if you do not have a brush glued to it.
The Creality nozzle wipe macro still sucks, but at least this way you don't need a brush glued to the build plate.
You must have root access to the printer and must make changes to printer.cfg.
Settings to change under [prtouch v2] in printer.cfg:
pa_clr_dis_mm: 12
clr_noz_start_x: 90
clr_noz_len_x: 18
Not verified on K1C and K1Max.
At the very least, the config-changes would be different for K1Max
Should ideally be printed in ABS, ASA or other high heat filaments, but so far PETG is working for me with no issues.
Must be printed with supports due to the height difference