1 / 3
CDC Badge 2-part case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
some-hardware-required two part case for CDC badge
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Two-part case for the CDC badge - https://github.com/riatlabs/cdc-badge/tree/main - that was available for purchase during 39C3.
Requires some hardware:
2x M4 nuts
2x M4x15 countersunk screws
4x M2x15 countersunk screws - probably; haven't acquired yet, and M3 is definitely too large
4x M2 nuts
Designed for printing with 2 walls with 0.6mm nozzle; 3 walls with 0.4mm nozzle should work fine as well.